1762-OB16 Allen-Bradley

1762-OB16 Allen-Bradley solid-state 24 Volt DC-rated source output module

Brand：Allen-Bradley Model number：1762-OB16

Country of origin: United States Product weight：0.225kg

HS code：8517623990

Product Details：

Product Dimensions：

1762 I/O is suitable for use in an industrial environment when installed in accordance with these instructions. Specifically, this equipment is intended for use in clean, dry environments (Pollution degree 2(1)) and to circuits not exceeding Over Voltage Category II(2) (IEC 60664-1).(3)

(1) Pollution Degree 2 is an environment where, normally, only non-conductive pollution occurs except that occasionally a temporary conductivity caused by condensation shall be expected. (2) Over Voltage Category II is the load level section of the electrical distribution system. At this level transient voltages are controlled and do not exceed the impulse voltage capability of the product’s insulation. (3) Pollution Degree 2 and Over Voltage Category II are International Electrotechnical Commission (IEC) designations.

Use the dimensional template shown below to mount the module. The preferred mounting method is to use two M4 or #8 panhead screws per module. M3.5 or #6 panhead screws may also be used, but a washer may be needed to ensure a good mechanical contact. Mounting screws are required on every module.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！

Allen-Bradley440G-TZS21UPRH

Allen-Bradley700-HLS1U2

Allen-Bradley1440-SDM02-01RA

Allen-Bradley1492-IFM40F-3

Allen-Bradley1746-A10

Allen-Bradley1746-NI4

Allen-Bradley1746-NI8

Allen-Bradley1747-L541

Allen-Bradley1747-L552

Allen-Bradley1756-A4

Allen-Bradley1756-A10

Allen-Bradley1756-A13